Ride-on four-wheel Land Leveling Machine/ Concrete Laser Screeds
JINZUN leveling and vibration automated laser screed machine mainly used for large area concrete construction concrete screeding, such as square, workshop, airport, playground and so on. Laser screeds can realize the high planeness and levelness of concrete screeding requirement. laser screed can used in flat, slope, double slope road concrete screeding and rebar concrete project.
1) Used high accuracy laser device, close loop control technology and precision integrated hydraulic system, and microcomputer automatic control.Vibratory Laser Power Screed
2) Screed assembly is hydraulic controlled. Integrated with laser system and computer control system, the machine will self-level and finish the screeding work with high efficiency.
3) The laser transmitter which measures the elevation is independent located, so there is no worry about the accumulative error. Compared with the traditional wy, the construction joints will be greatly reduced, so the maintenance cost and slab use will be down greatly.
4) The flat and dual slope can be fully automatic controlled by the transmitter. For the complex floor which has high requirement for drainage, the 3-D floor processing system can be used.
5) The forward-seated operation can widen operator vision, reduce the labor intensity and improve working efficiency.
6)Steering, forward and reverse of the machine are all controlled by the integrated handles. Operation buttons and controller which are located on the one side of th seat, is user-friendly.
|
Leveling and Vibration Automated Laser Screed Machine |
|||
|
Engine |
Leveling System |
||
|
Model |
Honda GX630 Electric Start |
Width |
2500mm |
|
Type |
Gasoline Engine, OHV, Double Cylinder |
Paving Mode |
Paving Auger |
|
Power |
20HP/3600rpm |
Power Auger |
High Torque, Hydraulic Motor |
|
Fuel Tank Capacity |
40L |
Centrifugal Force |
500N |
|
Lubricant |
1.5L |
Vibration Frequency |
50Hz |
|
Fuel Consumption |
313g/kwh |
Screed Head Type |
Swing Type |
|
Travel System |
Screed Plate Height |
330mm |
|
|
Drive |
Hydraulic motor, Four wheel drive |
Paving Depth |
30-200mm |
|
Wheel |
Solid puncture-proof tyre |
Translational Range |
500mm |
|
Speed |
0-70m/min |
Operation |
|
|
Laser Control |
Forward, backward |
Handle Control, CVT |
|
|
Control |
Microcomputer laser scanning |
Steering |
Hydraulic Control |
|
Control Effect |
Plane, slope or dual slope |
Cleaning System |
|
|
Dimensions and Weight |
Power |
Hydraulic Motor |
|
|
Dimensions |
2554*2500*2360mm |
Theoretical Flow |
20L/min |
|
Weight |
1080kg |
Rated Pressure |
7Mpa |
| Contact Person : | Alice |
|---|
