YD11 Automatic Man-Drive Ride On Computer Control Screed Thermoplastic Highway Line Painter road marking device
YD11 is a screed type road line marking machine, compact and small, flexible to operate.
Under the premise of sufficient melted material, it also has relatively high construction efficiency.
The type I is for flat line, and the type II is for flat line and convex line.
1. It is a perfect equipment for urban big or middle scale road line marking operation.
2. Its advanced hydraulic drive stepless variable speed control system can adjust and control speed accurately.
3. The optimal design of its drive can control the machine operation effectively to ensure safety under emergent circumstance.
4. Its screeding structure can make the marking line straight and beautiful
5. Its sensitive, accurate and stable computer control system can realize all operations conveniently.
Technical Data:
Automatic computer control screed thermoplastic Road line marking machine for high way line marking
|
Model |
YD11 Automatic computer control screed thermoplastic road marking device |
|
Engine |
21Hp Japan HONDA gasoline engine |
|
Driving system |
The original imported America SAUER variable speed transmission system with automatic brake device, which can be freely operated in forward, back off or stop |
|
Driving speed |
0-15km/h |
|
Max climbing capability |
15° |
|
Heating mode |
liquefied petroleum gas,Auto-Ignition Control System |
|
Steering system |
smooth and reliable mechanical control |
|
Glass beads spray system |
air jet |
|
Control system |
computer control system |
|
Paint tank capacity |
320kgs |
|
Glass beads tank capacity |
50kgs |
|
Line width |
100-500mm |
|
Line thickness |
1.5-2.5mm |
|
Application |
screed type |
|
Alarming function: |
equipped with alarming lamp and electro flicker warning light |
|
Size |
3100mm (length)*1250mm (width)*1650mm (height) |
|
Weight |
1100kgs (not including the gas tank, with a 150mm shoe) |
Line Types controlled by computer
Main Characteristics:
1. Engine: Japanese Honda 22HP air-cooled electrical starting single-cylinder gasoline engine.
2. Driving system: The original imported America SAUER variable speed transmission system with automatic brake device, which can be freely operated in forward, back off or stop
3. Marking mode: Equipped with hydraulic screeding marking shoe; structure board is made of imported special steel sheet with high temperature resistance (2000°C), oxidation resistance and deformation resistance. It has much better stability after stamping. The plinth is the pneumatic screeding structure that is made of special alloy steel. Floor knife that contacts with the ground directly adopts imported hard tungsten steel knife-head. The precision technique ensures its better sensibility, abrasion proof and firmness. The marking has more regular raised shape, evener and straight bottom line edge, and perfect head. The standard configuration of the marking shoe is 150mm. (Option for other sizes according to the needs of customers).
4. Glass beads spraying system: 55kgs glass beads tank. Equipped with air jet single glass beads spraying gun, whose pressure, flow rate and spray width can be adjusted to ensure spraying glass beads much firmer, evener and more economical.
5. Electronic control: Set up various standard line-type control modes to realize micro-electronic intelligent control; the space between the gap lines can be adjusted freely.
6. Air compressor: 0.6 m3/min piston type air compressor. Air storage tank with adjustable pressure is equipped with automatic safety exhaust device.
7. Warning function: warning light whose flicker frequency (or burst flash) can be adjusted freely, it improves the safety of marking operation.
Packed in plywood case, which is free from fumigation. the package will protect the machine well in long time of sea shipment.
1. 12 months warranty: Any parts damaged during the warranty period will be offered free of charge
2. Training overseas provieded
1. Q: Can this machine preheat the thermoplastic paint?
A: No. It needs to work with a preheater. The tank on the machine only
for preserving the heat of thermoplastic paint.
2. Q: Do you have thermoplastic road marking machine with preheater?
A: Yes, we have. model YD2800 (double tank pre-heater), which is suitable for big line marking project.
For more details,pls check home page.
3.Q: Can I adjust the line thickness? And how?
A: Yes, it could be adjusted by edging knife and hanger. The normal line
thickness is 1.2-4 mm.
4.Q: How to mark lines in different width?
A:Change the marking hopper(buekct shoe), change line width. We have
varied sizes, from 50 mm to 450mm. Usually, the standard equipment is
150mm. The other size is optional. Also, we could produce special marking
hopper for you.
5. Q: What about the after-sale service?
A: We are responsible to provide technical advise in the machine's
whole shelf life. We help solving problems via whatsapp, skype,viber and
email by sending pictures and videos. and overseas traning provided.
6.Q: Could you produce customized machine?
A: Yes, we could. We are the manufacturer of thermoplastic road marking
machine in shenyang City.
7. What about the shipment?
A: It is on your choice. Usually, we recommend sea shipping which
provides reasonable prices. Also, for spare parts, it could be sent by
TNT,FEDX, DHL and other internatioanl express.
If you have other questions, please feel free to contact us!
| Contact Person : | Alice |
|---|
